01
Crew leader on call
Brent carries the same NFPA-96 certification and the same sign-off authority. With more than five years in the trade, he can execute any account on the roster without handoff friction.
For operations VPs · facilities directors · multi-site owners
Most hood-cleaning vendors quote you a person. Platinum quotes you a system — a documented NFPA-96 procedure, a trained crew running it, photo evidence on every job, and a continuity plan for when the primary operator is out. Victor is the standard-setter and the most experienced wand on the line. He is not, and structurally cannot be, the bottleneck.
Operational footprint shown is a rolling-window snapshot. Specific figures are subject to ongoing verification — references available on request after a signed NDA exchange.
II.
Victor founded Platinum in 2008 after working inside larger commercial cleaning shops. He left because the standard he wanted to hold didn’t exist anywhere he’d worked. Platinum is the version that does.
Every operator runs the same SOP. Every job is photographed at the same checkpoints. Every certificate cites the same NFPA-96 clauses. The work survives the operator because the operator isn’t what the work depends on.
Victor.
Owner & Lead Operator
17 years in the trade
Founded Platinum in 2008. Trains every operator personally. Hood-side on the largest commercial jobs and the rooftop on every fan-unit re-spec.
NFPA-96 Certified · Licensed · $2M Liability Insured
Brent.
Crew Leader
5+ years in the trade
Crew leader with more than five years in the trade. Runs the same NFPA-96 checklist and photo standard on every job.
NFPA-96 Certified · OSHA-10
David.
Crew Leader
5+ years in the trade
Crew leader with more than five years in the trade. Works across commercial kitchen, industrial steam, and softwash routes.
NFPA-96 Certified · OSHA-10
Marcus.
Crew Leader
5+ years in the trade
Crew leader with more than five years in the trade. Leads field work under Platinum's documented operating standard.
NFPA-96 Certified · OSHA-10
The contract
02 · The work, code by code
NFPA 96 isn't a vibe — it's a checklist. Six stages, each cleaned, measured, photographed, and filed. Step through the system.
IV.
01
Brent carries the same NFPA-96 certification and the same sign-off authority. With more than five years in the trade, he can execute any account on the roster without handoff friction.
02
Every account has a written job ticket: access protocol, baffle count, cleanout-port map, fan-unit make and torque spec, photo checklist. Any certified operator on the crew can pick up the ticket and execute the job to standard.
03
For overflow capacity or extended primary-operator absence, Platinum maintains a reciprocal coverage agreement with two other NFPA-96 certified Midwest shops we know and trust. Same standard, contractually backed.
04
Every photo from every job at every site is filed in a per-account archive you retain access to. If we’re ever unavailable, your next vendor inherits a complete history — not a memory gap.
V.
Procurement officers and operations VPs don’t just need the work done. They need the evidence the work was done correctly, filed in a place an auditor can find it. Here’s exactly what we send.
Cites the exact clauses (§ 11.6.2 plenum, § 11.6.4 riser, § 11.6.5 horizontal duct, § 11.6.6 fan, § 11.6.7 containment). Signed by the certified operator. Stamped with date and account number. Filed in your portal and emailed to the address on the account.
Before / after / detail shots for every stage. Roughly 50–80 photos per hood. Each photo carries a reference card with date, location, operator, and stage. Delivered as a dated PDF with the certificate, and as a folder in the archive.
Affixed to the hood with date of service and next service due. The artifact your inspector looks at first; the one that prevents the soft-fail conversation.
If a baffle had to be replaced, an access port had to be fabricated, a fan belt needed swap, a roof penetration was compromised — that’s called out in writing with a photo, and surfaced to your designated facilities contact before the invoice goes out.
VI.
Most of our commercial accounts are under NDA. The segments are accurate; the names are available on request after a reciprocal NDA.
Client segment list is current as of the most recent rolling-window review and will be confirmed with the account team before each public deploy of this page.
VII.
Multi-site scoping calls are roughly forty-five minutes. Victor or a senior operator joins. We’d like a recent inspection result, a site list, and your current hood-program SLA if one exists. We send back a written proposal within five business days.
accounts@platinumpowerwashing.com · references available on request